PACEPACKER SHOWS IT’S PACKING & PALLETISING PROWESS AT ASKEW & BARRETT
Within three months of being installed, a complete bagging and palletising line from Pacepacker Services has boosted productivity by 15-20% at pulse processor Askew & Barrett.
Askew & Barrett sources pulses from key agricultural merchants and then sorts, cleans and grades them at it’s processing plant in Wisbech, Cambridgeshire. The pulses are bagged into 12.5kg and 25kg paper sacks and 25kg woven polypropylene (WPP) sacks, before being palletised and transported to food manufacturers and retailers at home and abroad.
Until very recently, this entire operation, from empty bag placement to palletising, was performed by up to five operators, using independent pieces of equipment including a weigher, bag closer and stitcher.
The problem was that in order to keep up with demand, during busy periods, Askew & Barrett had to operate the line 24 hours a day, six days a week. Although the working day was either split into two 12 hour or three eight hour shifts, this was still physically demanding work, and the company didn’t want to continue exposing it’s staff to that level of manual handling.
“It takes it out of you standing at the end of the line, stacking sacks onto a pallet. We wanted to take steps to ensure the physical wellbeing of our employees“, explains production and warehouse manager Chris Askew.
Already a user of Pacepacker equipment, to reduce manual handling and increase productivity, the firm invested in a new line consisting of a T22 automatic sack placer, ticket dispenser, Total Bag Control (TBC) system and FANUC dual cell robot palletiser. Installed in February 2015, the faster line with potential to handle ten bags per minute, stacks bags onto pallets more consistently resulting in safer storage within the warehouse and easy loading of pallets onto containers. In time, the company hopes to reduce the working week from six days to five without laying anyone off, with staff members being deployed to less physical tasks. “Pacepacker has delivered everything we wanted – building a line that has eliminated the need for manual involvement and has already yielded double digit productivity improvements,” says Chris.
The project was not without it’s challenges: space was limited and Askew & Barrett had stipulated that they wanted to maintain good, clear access for forklift trucks.
“We worked closely with the customer to configure the line to fit in the available space. For example, we designed the TBC to kick bags at 90 degrees and then transport them round a corner rather than in a straight line,” says Pacepacker sales manager Ian Merchant.
WPP is always a potential issue for sack placers, which use a vacuum to pick up the bag on the top of the pile. WPP bags with a loose weave, like the ones at Askew & Barrett, prevent the vacuum system from working properly. Applying its sack expertise, Pacepacker developed a tail separator that ensures the sack placer only takes one bag at a time.
“We use a high volume vacuum system to pick up the bags, however due to the porous nature of WPP bags, there is the potential that more than one bag will be picked up. Therefore the tail separator lifts the tail end of the bag – the closed part – and holds it in place while it is rotated by 45 degrees and transported to the clamp for filling,” explains Ian.
After being placed on a clamp by the sack placer, sacks are filled and taken through the TBC system, a fully automated presentation device for feeding filled bags into a fixed head stitcher or heat sealer.
As the bag drops from the clamp, motorised grip arms close in on it, securing it in its formed state. These arms release the bag into a twin belt feeder where an integrated ticket dispenser inserts a tag with batch data, best before date and origin just before the bag is stitched.
“Because the TBC never lets go of the bag until it has been stitched, it ensures consistently perfect presentation, which in turn eliminates sack and product waste,” says Ian.
Pacepacker also integrated a LOMA IQ3 metal detector into the line and designed an automatic reject system for diverting contaminated bags. The metal detector is located just prior to the robot pick point for screening the smaller bags for metal. If metal is detected, as the sack rolls onto the pick conveyor, a stop gate lowers to allow it to pass onto a reject conveyor.
Askew & Barrett opted for a dual cell robotic palletiser incorporating the FANUC M410iC/185 for maximum performance. In a dual cell configuration, the robot is sited so it can swivel between two cells. This means that as soon as a robot has finished palletising a sack, it starts to palletise on the other pallet in the cell. “This is an extremely time-efficient configuration as the robot is always in use – it can start loading a new pallet while the full pallet is being transported to the delivery area,” says Ian.
Askew & Barrett has another reason for wanting a dual cell palletiser; the company is looking to replace an adjacent packing line with a Pacepacker TBC system, and link the two lines at the point of palletising, so that they can both be serviced by the existing palletiser. Chris is confident that with Pacepacker’s continued support, this upgrade will further increase productivity.
“Currently the line is producing 10 tonnes per hour, but it is definitely capable of much more,” he adds. “Our ultimate goal is 15-20 tonnes per hour, which would equate to a 100% increase on what we were producing just a few months ago. Pacepacker has been and will continue to be instrumental in achieving this ambition.”
For more information, please contact: